Kontron CP3003-V - Manual (Page 23)

CP3003-SA Introduction
ID 1052-6929, Rev. 2.0 Page 1 - 3
D R A F T — F O R I N T E R N A L U S E O N L Y
1. Introduction
1.1 Board Overview
The CP3003-SA is a highly integrated 3U, 4 HP CompactPCI system controller board optionally
expandable to 8 HP
and available either as a front I/O version or as a rear I/O version. It has
been designed to support the multi-chip package, 3
rd
generation Intel® Core™ i7 processor
combined with the mobile Intel® QM77 Express Chipset.
The board supports the Intel® Core™ i7-3612QE quad-core processor with 2.1 GHz frequency,
the Intel® Core™ i7-3555LE dual-core processor with 2.5 GHz frequency and the Intel®
Core™ i7-3517UE dual-core processor with 1.7 GHz frequency. All processors are built on 22-
nm technology and provided in a BGA package. The processor is soldered on the CP3003-SA,
which results in a higher Mean Time Between Failures (MTBF) and a significant improvement
in cooling.
Two SODIMM sockets are available on the CP3003-SA to provide up to 16 GB dual-channel,
DDR3 memory with Error Checking and Correction (ECC) running at 1600 MHz. The graphics
controller and the memory controller are integrated in the processor. Furthermore, an external
HDD/SSD and either a SATA Flash module with up to 32 GB SLC NAND flash memory or a
Smart Extension Module (a SATA/USB 2.0 adapter) can be integrated onto the CP3003-SA.
The CP3003-SA comes with three Gigabit Ethernet ports, one VGA interface, two COM ports,
six SATA interfaces, four USB 2.0 ports, one USB 3.0 port, two DisplayPort interfaces, and one
x8 PCI Express 2.0 XMC interface. The CP3003-SA provides support for one 8 HP I/O exten-
sion module such as the CP3003-HDD or the CP3003-XMC as well as one rear I/O module
such as the CP-RIO3-04.
The board supports a configurable 32-bit/ 33 MHz (66 MHz on request) PCI/PCI-X hot swap
CompactPCI interface. When installed in the system slot, the interface is enabled, and when
installed in a peripheral slot, the CP3003-SA is isolated from the CompactPCI bus.
The CP3003-SA further provides safety and security features via a Trusted Platform Module
(TPM) 1.2.
The board fits into all applications situated in industrial environments, including I/O intensive
applications where only one slot is available for the CPU, making it a perfect core technology
for long-life applications. Components which have high temperature tolerance have been
selected from embedded technology programs, and therefore offer long-term availability.
The board is offered with various Board Support Packages including Windows, VxWorks and
Linux operating systems. For further information concerning the operating systems available for
the CP3003-SA, please contact Kontron.
1.2 Board-Specific Information
The CP3003-SA is a CompactPCI single-board computer based on the 3
rd
generation Intel®
Core™ i7 processor and specifically designed for use in highly integrated platforms with solid
mechanical interfacing for a wide range of industrial environment applications.