Kontron CP3003-V - Manual (Page 25)

CP3003-SA Introduction
ID 1052-6929, Rev. 2.0 Page 1 - 5
D R A F T — F O R I N T E R N A L U S E O N L Y
1.3 System Expansion Capabilities
1.3.1 CP3003-HDD Module (8 HP and 12 HP)
The CP3003-HDD module for the 8 HP CP3003-SA version provides various I/O ports. On the
front panel, it includes two DisplayPort connectors, one Gigabit Ethernet port, one USB 3.0
port, and one RS-232 COM port. Onboard ports include one SATA connector for SATA 2.5”
HDD or SSD devices as well as a CFast card socket.
As a further extension capability of the CP3003-SA to 12 HP, a SATA adapter module is avail-
able for use in conjunction with the CP3003-HDD module to provide an additional SATA con-
nector for a 2.5" SATA HDD/SSD device. The 12 HP CP3003-SA does not provide a CFast
card socket.
For further information concerning the CP3003-HDD module, refer to Appendix A.
1.3.2 CP3003-XMC Module (8 HP)
The CP3003-XMC module for the 8 HP CP3003-SA version provides one XMC mezzanine in-
terface for support of one x8, x4 or x1 PCI Express 2.0 XMC module. In addition, the CP3003-
XMC module provides a socket for CFast memory cards.
For further information concerning the CP3003-XMC module, refer to Appendix B.
1.3.3 CP-RIO3-04 Rear I/O Module
The CP-RIO3-04 rear I/O module has been designed for use with the CP3003-SA board from
Kontron and provides comprehensive rear I/O functionality.
For further information concerning the CP-RIO3-04 rear I/O module, refer to Appendix C.
1.3.4 SATA Flash Module
The 4 HP CP3003-SA provides support for up to 32 GB of SLC NAND flash memory in combi-
nation with an optional SATA Flash module, which is connected to an onboard connector.
For further information concerning the SATA Flash module, refer to Appendix D.
1.3.5 Smart Extension Module
The Smart Extension Module expands the onboard I/O capability and provides one additional
SATA cable connector as well as one USB 2.0 connector thereby facilitating the connection to
system-internal USB and SATA devices.
For further information concerning the SATA Flash module, refer to Appendix E.
1.4 Board Diagrams
The following diagrams provide additional information concerning board functionality and
component layout.