Kontron CP3002 uEFI - Manual (Page 9)

CP3002/-RC/-RA uEFI BIOS Starting uEFI BIOS Setup
ID 1042-8946, Rev. 3.0 Page 3
P R E L I M I N A R Y
1. Starting uEFI BIOS Setup
The CP3002/CP3002-RC/CP3002-RA is provided with a Kontron-customized, pre-installed
and configured version of Aptio® (referred to as uEFI BIOS in this manual), AMI’s next gener-
ation BIOS firmware based on the Unified Extensible Firmware Interface (uEFI) specification
and the Intel® Platform Innovation Framework for EFI. This uEFI BIOS provides a variety of
new and enhanced functions specifically tailored to the hardware features of the CP3002/
CP3002-RC/CP3002-RA. This user guide reflects the uEFI BIOS version R13.
To take advantage of these functions, the uEFI BIOS comes with a Setup program which pro-
vides quick and easy access to the individual function settings for control or modification of the
uEFI BIOS configuration.
The Setup program allows the accessing of various menus which provide functions or access
to sub-menus with more specific functions of their own. The individual menus and the configu-
rable functions are described in this guide.
To start the uEFI BIOS Setup program, follow the steps below:
1. Power on the board.
2. Wait until the first characters appear on the screen (POST messages or splash screen).
3. Press the <F2> key.
4. If the uEFI BIOS is password-protected, a window such as the one below will appear:
Enter either the User password or the Administrator password (refer to Chapter 4, Secu-
rity Setup, for further information), press <RETURN>, and proceed with step 2.
5. A Setup menu with the following token attributes will appear.
The currently active menu and the currently active uEFI BIOS Setup item are highlighted
in white.
E n t e r P a s s w o r d