Kontron CP6003-RC uEFI BIOS User Manual
User guide, Cp6003-sa/ra/rc uefi bios
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Revision History
- Imprint
- Disclaimer
- Table of Contents
- 1. Starting uEFI BIOS Setup
- 2. Main Setup
- 3. Boot Setup
- 4. Security Setup
- 5. Save & Exit
- 5.1 Save Changes and Exit
- 5.2 Discard Changes and Exit
- 5.3 Save Changes and Reset
- 5.4 Discard Changes and Reset
- 5.5 Save Changes (Save Options)
- 5.6 Discard Changes (Save Options)
- 5.7 Restore Defaults (Save Options)
- 5.8 Save as User Defaults (Save Options)
- 5.9 Restore User Defaults (Save Options)
- 5.10 Boot Override
- 6. The uEFI Shell
- 6.1 Introduction, Basic Operation
- 6.2 Kontron Shell Commands
- 6.2.1 kboardconfig uEFI Shell Command
- 6.2.2 kboardinfo uEFI Shell Command
- 6.2.3 kboot uEFI Shell Command
- 6.2.4 kbootnsh uEFI Shell Command
- 6.2.5 kclearnvram uEFI Shell Command
- 6.2.6 kclsp uEFI Shell Command
- 6.2.7 kflash uEFI Shell Command
- 6.2.8 kipmi uEFI Shell Command
- 6.2.9 kmkramdisk uEFI Shell Command
- 6.2.10 kpassword uEFI Shell Command
- 6.2.11 kresetconfig uEFI Shell Command
- 6.2.12 kwdt uEFI Shell Command
- 6.3 uEFI Shell Scripting
- 7. Updating the uEFI BIOS