The uefi shell cp6003-sa/ra/rc uefi bios – Kontron CP6003-RC uEFI BIOS User Manual
Page 54
The uEFI Shell
CP6003-SA/RA/RC uEFI BIOS
Page 54
ID 1045-9149, Rev. 2.0
P R E L I M I N A R Y
SETTINGS:
mode <mode>:
Display/Set the IPMI controller operating mode
Options:
bmc:
IPMI controller operates in BMC mode (master)
smc:
IPMI controller operates in SMC mode (slave)
net:
Set IPMI-over-LAN (IOL) / Serial-over-LAN (SOL) parameters
sel:
Display system event log
sensor list|read:
Show board sensor data
Options:
list:
Display an overview of all available board sensors
read:
Display specific sensor data
raw [<bytes> <...>]:
Execute raw IPMI command
Syntax:
raw [NetFn] [LUN] [COMMAND] ...
rawsendmessage [<bytes> <...>]:
Execute raw SendMessage
command
Syntax:
rawsendmessage [rsSa] [CHANNEL] [NetFn] [LUN]
[COMMAND] ...
info:
Display IPMI firmware information
kipmi (continued)