Kontron CP6003-RC uEFI BIOS - Manual (Page 57)

CP6003-SA/RA/RC uEFI BIOS The uEFI Shell
ID 1045-9149, Rev. 2.0 Page 57
P R E L I M I N A R Y
6.2.11 kresetconfig uEFI Shell Command
kresetconfig
FUNCTION: Control the board reset behavior
SYNTAX: kresetconfig [-?|<parameter>]
where:
-? Show help
<parameter> pcislave [on|off]
Controls if the board shall react on a CPCI backplane
reset if it is used as slave board in a peripheral slot. It
has no effect if the board is located within a CPCI mas-
ter slot.
Note: This parameter is volatile, and at next start is set
to off.
DESCRIPTION: The kresetconfig command controls the board’s reset behavior.
USAGE: Enable CPCI backplane reset:
COMMAND / RESPONSE:
Shell> kresetconfig pcislave on
Reset from system master is enabled
Disable CPCI backplane reset:
COMMAND / RESPONSE:
Shell> kresetconfig pcislave off
Reset from system master is disabled