Kontron KTQ45-FLEX - Manual (Page 78)

KTD-00782-I KTQ45 family Page 78 of 92
6.8.1 Boot – Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Settings Configuration Allows BIOS to skip
certain tests while
booting in order to
decrease boot time.
<-> Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Quick Boot [Enabled]
Quiet Boot [Disabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait for ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Force boot Device [Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Feature Options Description
Quick Boot Enabled
Disabled
Allows BIOS to skip certain tests while booting in
order to decrease boot time.
Quiet Boot Disabled
Enabled
Black Screen
White Screen
Disabled: Displays normal POST messages.
Enabled: Displays OEM Logo (no POST messages).
Black Screen: No picture.
White Screen: White picture.
AddOn ROM Display Mode Force BIOS
Keep current
Set display mode for Option ROM.
Bootup Num-Lock Off
On
Select Power-on state for numlock
PS/2 Mouse Support Disabled
Enabled
Auto
Select support for PS/2 Mouse.
Wait for ‘F1’ If Error
(see note)
Disabled
Enabled
Wait for F1 key to be pressed if error occurs.
Hit ‘DEL’ Message Display Disabled
Enabled
Displays “Press DEL to run Setup” in POST.
Interrupt 19 Capture Disabled
Enabled
Enabled: Allows option ROMs to trap interrupt 19
Force boot Device Disabled
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
5 th IDE Master
6 th IDE Master
RAID
Any Harddrive (Above)
Network
Overrides current boot setting. Device must be in the
boot priority menu, though. If the device fails to boot,
the system will NOT try other devices.
Note: List of errors:
<INS> Pressed Primary Master Hard Disk Error PCI I/O conflict
Timer Error S.M.A.R.T HDD Error PCI ROM conflict
Interrupt Controller-1 error Cache Memory Error PCI IRQ conflict
Keyboard/Interface Error DMA Controller Error PCI IRQ routing table error
Halt on Invalid Time/Date Resource Conflict
NVRAM Bad Static Resource Conflict