Kontron KTQ67-FLEX MED - Manual (Page 7)

KTQ67/Flex -Medical Users Guide
KTD-N0849-D Page 7
Introduction
This manual describes the KTQ67/Flex-Medical made by KONTRON Technology A/S. In this manual
the board will also be denoted KTQ67.
The KTQ67/Flex-Medial is based on the Q67 chipset, support 2nd and 3rd generation Intel® i7 -, i5 -,
i3 2Core and 4Core processor and the Celeron B810 2Core, see “Processor Support Table for more
specific details.
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is
focused on describing the KTQ67 board special features and is not intended to be a standard PC-AT
textbook.
New users are recommended to study the short installation procedure stated in the following chapter
before switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via
the BIOS setup menus. Only exception is the “Load Default BIOS Settings” Jumper.
Introduction