Kontron KTH81-mITX - Manual (Page 45)

KTD-N0882-H Page 45 Internal Connectors
KTQ87/KTH81 Users Guide
USB 4 & 5 (USB4/5) (USB1)
USB Ports 4 and 5 are supplied on the internal USB4/5 pinrow connector USB1.
Note Type Signal PIN Signal Type Note
1 PWR 5V/SB5V 1 2 5V/SB5V PWR 1
IO USB8- 3 4 USB9- IO
IO USB8+ 5 6 USB9+ IO
PWR GND 7 8 GND PWR
NC KEY 9 10 NC NC
USB 6 & 7 (USB6/7) (USB2)
USB Ports 6 and 7 are supplied on the internal USB6/7 pinrow connector USB1. (KTQ87/Flex only).
Note Type Signal PIN Signal Type Note
1 PWR 5V/SB5V 1 2 5V/SB5V PWR 1
IO USB8- 3 4 USB9- IO
IO USB8+ 5 6 USB9+ IO
PWR GND 7 8 GND PWR
NC KEY 9 10 NC NC
USB 8 & 9 (USB8/9) (USB3)
USB Ports 6 and 7 are supplied on the internal USB6/7 pinrow connector USB1. (Flex only).
Note Type Signal PIN Signal Type Note
1 PWR 5V/SB5V 1 2 5V/SB5V PWR 1
IO USB8- 3 4 USB9- IO
IO USB8+ 5 6 USB9+ IO
PWR GND 7 8 GND PWR
NC KEY 9 10 NC NC
Note1:
In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Available cable kit:
PN 821401 Bracket Dual USB Cable
Signal Description
USBx+ USBx- Differential pair works as Data/Address/Command Bus.
5V/SB5V
5V supply for external devices. SB5V is supplied during powerdown to allow wakeup on
USB device activity. Each 5V protected by resettable 1A fuse.