Kontron KTH81-mITX - Manual (Page 54)

KTD-N0882-H Page 54 Internal Connectors
KTQ87/KTH81 Users Guide
7.16 XDP_CPU (Debug Port for CPU) (XDP_CPU)
The XDP_CPU (Intel Debug Port for CPU) connector is not mounted and not supported. XDP connector
layout (pads) is located on the backside of PCB and is prepared for the Samtec BSH-030-01-F-D-A-TR.
Note Pull U/D Ioh/Iol Type Signal PIN Signal Type Ioh/Iol Pull U/D Note
PWR GND 1 2 GND PWR
REQ 3 4 STB_0_DP
RDY 5 6 STB_0_DN
PWR GND 7 8 GND PWR
CFG0 9 10 CFG8
CFG1 11 12 CFG9
PWR GND 13 14 GND PWR
CFG2 15 16 CFG10
CFG3 17 18 CFG11
PWR GND 19 20 GND PWR
BPM#0 21 22 STB_1_DP
BPM#1 23 24 STB_1_DN
PWR GND 25 26 GND PWR
CFG4 27 28 CFG12
CFG5 29 30 CFG13
PWR GND 31 32 GND PWR
CFG6 33 34 CFG14
CFG7 35 36 CFG15
PWR GND 37 38 GND PWR
PWRGD 39 40 ITP_CLKP
SW_ON_N 41 42 ITP_CLKN
PWR CPU_VCCIO 43 44 CPU_VCCIO PWR
PWR_DEBUG 45 46 RESET#
CPU_HOOK3 47 48 DBR#
PWR GND 49 50 GND PWR
SMB_DAT 51 52 TDO
SMB_CLK 53 54 TRST#
NC 55 56 TDI
TCK 57 58 TMS
PWR GND 59 60 XDP_PRESENT#