Kontron KTHM65-mITX - Manual (Page 22)

KTHM65 Users Guide
KTD-N0838-A Page 22
The principal test system and test equipment used
1. Tektronix TDS5104B
2. Tektronix TCPA300
3. Tektronix TCP312
4. Fluke 289
5. Fluke 179
6. ATX rail switch
Note: Power consumption of PSU (power loss), Monitor and HDD are not included.
The following six configurations (a – f) have been tested
a) Low Power Setup KTHM65/mITX ATX+12V PSU
b) Low Power Setup KTHM65/mITX +12V only PSU
Standard system configuration equipped with PCIex1 card, Internal graphics, 2x SATA disks, Intel i5
CPU, 1x SODIMM (1GB Modules), Monitor, Keyboard & Mouse. 1x 1-4GB USB Stick, 12V active
cooler (KT), PSU (Corsair 430W)
c) High Power Setup KTHM65/mITX ATX+12V PSU
d) High Power Setup KTHM65/mITX +12V only PSU
Standard system configuration equipped with PCIex1, PCIex16, miniPCIe WLAN, 4x SATA disks,
Intel i7 CPU, 2x SODIMM (1GB Modules), Monitor, Keyboard & Mouse, 4x 1-4GB USB Sticks, 12V
active cooler (KT), PSU (Corsair 430W).
Note: The tests were carried out using KTQM67/mITX, having extra Firewire controller and extra two
LAN controllers mounted. This makes the power consumption values a little bit higher than expected for
the KTHM65/mITX.
ATX supplies
KTHM65 PSU
Gnd
Current
Probe Tektronix TDS5104B
System Specification