System specification – Kontron KTHM65-mITX User Manual

Page 12

Advertising
background image

KTHM65 Users Guide

KTD-N0838-A Page 12

Hardware

Monitor

Subsystem

Smart Fan control system, support Thermal® and Speed® cruise for two on-board

Fan connectors: CPU Fan (on-board) and System Fan (on-board)

Smart Fan control system, support Speed® cruise for two off-board Fans

(Fan3/Fan4) via Feature Connector.

Three thermal inputs: CPU Die temperature (precision +/- 3ºC), System

temperature (precision +/- 3ºC) and System Temperature External via Feature

Connector (precision +/- 1ºC).

Voltage monitoring

Intrusion (Case Open) detect input, (via Feature connector)

Sleep S5# Indication, (via Feature connector)

System Powergood Signal, (via Feature connector)

Power

Supply Unit

ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.

Alternatively: +12V single supply via ATX+12V (4-pole) connector, but with limitation to

power load (especially +5V for USB).

Battery

Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is 4.1µA when PSU is disconnected and 0 µA in S0 – S5.

CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

BIOS

Kontron Technology / AMI BIOS (EFI core version)

Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play

o Suspend (S1 mode)

o Suspend To Ram (S3 mode)

o Suspend To Disk (S4 mode)

“Always On” BIOS power setting

Operating

Systems

Support

WinXP (32b + 64b *)

Vista (32b * + 64b *)

Windows 7 (32b + 64b *)

Linux

VxWorks

Windows Server 2003 r2 (32b * + 64b *)

Windows Server 2008 r2 (32b * + 64b *)

WES7 (32b + 64b)

*= Out Of The Box installation test only.

System Specification

Advertising
This manual is related to the following products: