Kontron KTQM87-mITX - Manual (Page 61)

KTD-N0886-A Page 59 BIOS - Advanced
KTQM87/mITX Users Guide
Processor Power Management
Function Selection Description
Intel ® SpeedStep ™
Disabled
Enabled
Enable processor performance states (P-States).
Boot Performance Mode
Max Performance
Max Battery
Auto
Select the performance state that the BIOS sets
before OS handoff.
Turbo Mode
Disabled
Enabled Enable processor Turbo Mode. EMTTM must also
be enabled.
Turbo Mode Power Limit Lock
Disabled
Enabled
Enable/Disable Locking of turbo settings. When
Enabled, TURBO_POWER_LIMIT MSR will be
locked and a reset will be required to unlock the
register.
Long Power Limit 0, 1,2,…200
Turbo Mode Long Duration Power Limit (aka
Power Limit 1) in Watts. The value may vary from
0 to Fused Value. If the value is 0, the fused
value will be programmed. A value greater than
fused TDP value will not be programmed.
Continue
Phoenix SecureCore Technology Setup
Advanced
Processor Power Management Item Specific Help
Intel ® SpeedStep ™
Boot Performance Mode
Turbo Mode
Turbo Mode Power Limit Lock
Long Power Limit
Long Power Limit Time
Short Power Limit
Short Duration Turbo mode
Energy Efficient Enable
Configure TDP Boot Mode
Lock TDP Setting
TDP Custom Setting
C-States
Extend C-States
C3-State
C6-State
C6 Latency
C7-State
C7 Latency
C-State Auto Demotion
C-State UnDemotion
Package C State Demotion
Package C State UnDemotion
C State Pre-Wake
Lake Tiny
[ Enabled ]
[Max Performance]
[Enabled]
[Disabled]
[ 0]
[28]
[ 0]
[Enabled]
[Enabled]
[Nominal]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Short]
[C7s]
[Long]
[C1 and C3]
[C1 and C3]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
Enable processor performance states
(P-States).
F1 Help ↑↓ Select Item +/- Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select ► Sub-Menu F10 Save and Exit