1 introduction, Introduction, 1introduction – Kontron KTQM87-mITX User Manual
Page 7
KTD-N0886-A
Page 5
Introduction
KTQM87/mITX Users Guide
1
Introduction
This manual describes the KTQM87/mITX board made by KONTRON Technology A/S. This board will also be
denoted KTQM87 within this Users Guide.
The KTQM87 board is based on the QM87 chipset, support 4
th
generation Intel® Haswell i7 -, i5 -, i3 2Core
and 4Core mobile processors, and Celeron. See “Processor Support Table” for more specific details.
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is focused on
describing the KTQM87 board’s special features and is not intended to be a standard PC-AT textbook.
New users are recommended to study the short installation procedure stated in the following chapter
before switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via the
BIOS setup menus. Only exception is the “Load Default BIOS Settings” Jumper.
Latest revision of this manual, datasheet, BIOS, drivers, BSP’s (Board Support Packages), Mechanical
drawings (2D and 3D) can be downloaded from here: