Introduction am5030 – Kontron AM5030 User Manual
Page 28
Introduction
AM5030
Page 1 - 12
ID 1036-3302, Rev. 1.0
P R E L I M I N A R Y
IPMI
Module Management
Controller
•
NXP® LPC2368 ARM7 microcontroller with redundant 512 kB Firmware
Flash and automatic roll-back strategy
•
The MMC carries out IPMI commands such as monitoring several on-
board temperature conditions, board voltages and the power supply sta-
tus, and managing hot swap operations.
•
The MMC is accessible via a local IPMB (IPMB-L) and one host Key-
board Style Interface (KCS).
Hot Swap
The AM5030 has full hot swap capability.
Thermal Management
Processor and board overtemperature protection is provided by:
•
Temperature sensors integrated in the Intel® Xeon® LC5518 processor
•
Four Digital Thermal Sensors (DTS) for the processor cores
•
One digital temperature sensor for monitoring the uncore module
•
One digital temperature sensor for monitoring the IIO module
•
Catastrophic Cooling Failure Sensor (THERMTRIP#)
•
One temperature sensor integrated in the Intel® 3420 chipset for moni-
toring the chipset
•
Two onboard temperature sensors for monitoring the board temperature
•
NTC thermal resistor for monitoring the temperature in the CPU core
voltage power area
•
Specially designed heat sink
Security
TPM
Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security (on request)
Table 1-2:
AM5030 Main Specifications (Continued)
AM5030
SPECIFICATIONS