Kontron AM5030 - Manual (Page 29)

AM5030 Introduction
ID 1036-3302, Rev. 1.0 Page 1 - 13
P R E L I M I N A R Y
General
Power Consumption Refer to Chapter 5, “Power Considerations” for information related to the
power consumption of the AM5030.
Temperature Range Operational: 0°C to +45°C for long-term operation
-5°C to +55°C for short-term operation
Storage: -40°C to +70°C Without battery or any additional components
Mechanical Double, Full-size module
Dimensions 180.6 mm x 148.5 mm x 28.95 mm
Board Weight AM5030 with heat sink but without SATA Flash module and without DDR3
memory modules: 528 g
DDR3 VLP DIMM module: 12 - 28 g, depending on module type
JTAG One JTAG interface connected to the AMC Card-edge connector for debug-
ging and manufacturing purposes
Battery The AM5030 is provided with a battery socket for a 3.0V lithium battery for the
RTC.
Recommended type: CR2025
Temperature ranges:
Operational: -20°C to +70°C
typical (refer to the battery manufacturer’s
specifications for exact range)
Storage: -55°C to +70°C typical (no discharge)
Table 1-2: AM5030 Main Specifications (Continued)
AM5030 SPECIFICATIONS
Note ...
When a battery is installed, refer to the operational specifications
of the battery as this will most likely have an influence on the stor-
age temperature of the AM5030 (See "Battery" below).
Note ...
When additional components are installed, refer to their opera-
tional specifications as this will influence the operational and stor-
age temperature of the AM5030.