Kontron AM4140 U-Boot Bootloader - Manual (Page 29)

AM4140 U-Boot Bootloader U-Boot Usage
ID 1052-0281, Rev. 1.0 Page 29
P R E L I M I N A R Y
USAGE: Select new base configuration
COMMAND / RESPONSE:
=> sconf select 1
New base configuration 1
=>
Configure parameter for new base configuration
COMMAND / RESPONSE:
=> sconf set
Board’s Port Configuration:
Option / Setting | Value # command, option <and parameter>
---------------------------------------------------------------
SRIO Sys.Size : small # sconf set srio <small | large>
SRIO mode : agent # sconf set srio <agent | host>
AMC Port Activation / Forced settings (ignoring E-Keying):
Option / Setting | Value # command, option <and parameter>
-----------------------------------------------------------
Port 4 : auto # sconf set port4 <auto | disable | enable>
Port 8 : auto # sconf set port8 <auto | disable | enable>
=> sconf set port4 disable
=>
Display current “sconf” status
COMMAND / RESPONSE:
=> sconf status
Configuration (Activation) Status:
Module is running: managed (E-Keying)
sconf disables E-Keying: no
sconf deactivated by DIP SW: no
Configuration (stored) is active:
AMC Base Configuration: 0
=>
Save current settings
COMMAND / RESPONSE:
=> sconf save
Saving: #####
=>
sconf (continued)