Kontron AM4150 IPMI Firmware - Manual (Page 20)

IPMI Firmware AM4150
Page 20 ID 1052-5679, Rev. 1.0
P R E L I M I N A R Y
3.3 Get Control State (Firmware Hub, Boot Order)
Table 7: Get Control State
COMMAND LUN NetFn CMD
Get Control State (Firmware Hub, Boot Order) 00h OEM = 3Eh 21h
REQUEST DATA
Byte Data Field
1 Control ID:
00h = Firmware hub (SPI boot flash) selection
9Dh = Reserved
RESPONSE DATA
Byte Data Field
1 Completion code
4 Control state (refer to Chapter 3.2, Set Control State)
00h .. 01h for control ID = Firmware hub (SPI boot flash) selection