Kontron AM4150 IPMI Firmware - Manual (Page 32)

IPMI Firmware AM4150
Page 32 ID 1052-5679, Rev. 1.0
P R E L I M I N A R Y
5.3.3 Firmware Upgrade - “ipmitool fwum”
The “ipmitool” version 1.8.9 doesn’t support HPM.1 correctly. Tool versions prior to this do not
support HPM.1 at all.
The firmware upgrade procedure starts with the download of the binary firmware file using, for
example, the following command:
The next step is the activation of the newly downloaded MMC firmware. This is done using :
Detailed information about the active and inactive firmware images can be obtained using the
following command:
To perform a manual rollback to the previously good firmware image, use the following com-
mand:
ipmitool fwum download <Binary_FWFile>.bin
ipmitool fwum upgrade
ipmitool fwum status
ipmitool fwum rollback