Onboard devices, Additional interfaces – Kontron COMe-cTH6 User Manual
Page 13
7
COMe-cTH6 User’s Guide
www.kontron.com
»
Watchdog Timer
WDT via CPLD
»
GPIO
Four GPIs and four GPOs available on the COM Express connector
»
SMBus
SMBus brought to the COM Express connector via FCH
»
I
2
C
I
2
C master with 7-bit I
2
C addressing with 100 KHz or 400 KHz operation and controller on
CPLD, for off- and on- module use
»
External BIOS ROM
Support for carrier board SPI devices (new with COM Express Rev 2)
»
Suspend Modes
Core Sleep States: S0, S3, S4, S5, S5 Eco
»
Wake
WAKE0#, WAKE1# support
»
TDP:
2.3W
»
Package:
24.5mmx24.5mm
3.1.6 Onboard Devices:
»
Ethernet:
Intel® I210-AT GbE Controller 10/100/1000 Mbit
»
LVDS
Analogix ANX3110 18/24-bit single/dual channel DP/LVDS Translator
»
CPLD
Altera EPM1270 CPLD
»
Watchdog Timer:
BIOS enables and configures watchdog in the CPLD
»
Hardware Monitor
Nuvoton NCT7904D chip
»
I
2
C EEPROM
AT24HC04B serial EEPROM for module parameter storage
»
TPM
Trusted Platform Module uses Atmel AT97SC3204 chip
»
Fan Header
Molex 53261-0371 3-pin header for consistency with Kontron Universal Cooling Solution
»
Power Management:
BIOS-enabled ACPI 4.0 power management for supported OSs
3.1.7 Additional Interfaces:
»
Passive Cooling:
Passive and Critical Trip Point
»
ACPI:
ACPI 4.0
»
Input Voltage:
Single supply support with wide range power supply input, 4.75V – 20V
5.0V supply is the optional standby power rail.
DRAFT COPY FOR REVIEW ONLY
DRAFT COPY FOR REVIEW ONLY