Kontron COMe-cTH6 - Manual (Page 30)

24
COMe-cTH6 User’s Guide
www.kontron.com
4.1.4 Connector J4 – JTAG (AMD Embedded Probe)
J2 is a 22-pin flat foil connector (FFC) used to support the AMD Embedded Probe Header interface definition.
NOTE: A cable adapter must be used to connect a Sage debugger tool to the debug connector.
Pin Name
1 GND1
2 DBRDY
3 GND2
4 TDO
5 GND3
6 TDI
7 GND4
8 TMS
9 GND5
10 TCK
11 GND6
12 DBREQ
13 PWRBTN
14 VDDIO
15 SYSRST#
16 GND7
17 RST#
18 GND8
19 SCLK
20 GND9
21 SDAT
22 GND10
Table 7: J4 AMD Embedded Probe Connector Pin-Out
WARNING : The debug port is for internal use only. Do not connect any devices.
DRAFT COPY FOR REVIEW ONLY
DRAFT COPY FOR REVIEW ONLY