Kontron COMe-cTH6 - Manual (Page 42)

36
COMe-cTH6 User’s Guide
www.kontron.com
7.3 Onboard Fan Connector
This section describes how to connect an optional fan for active cooling to a header located directly on the COMe-
cTH6 COM.
Figure 6: Fan Connector (J1) Location and Pin Numbering
The onboard fan connector (J1) is on the left top side of the PCB. The bubble in the above fixture shows the pin
enumeration as viewed from the PCB edge.
Pin Description
1 CPU_FAN_TACH
2 FAN_12V_VCC
3 FAN_GND
Table 5: Fan Connector (J1) Pinout
Connector J1 specifications and Kontron part numbers for the components are:
» Part number: (Molex) 53261-0371
» Mates with: (Molex) 51021-0300
» Crimp terminals: (Molex) 50079-80000 (26-28 AWG)
DRAFT COPY FOR REVIEW ONLY
DRAFT COPY FOR REVIEW ONLY