Kontron COMe-cHL6 - Manual (Page 44)

COMe-cHL6 / Features and Interfaces
4.14 Display Configuration
Maximum supported Resolutions in Single Display Configuration
Port Max Resolution
DP 3200×2000@60Hz, 24bpp
HDMI 4096×2160@24Hz, 24bpp
2560×1600@60Hz, 24bpp
1920×1080@60Hz, 36bpp
DVI 1920×1200@60Hz, 24bpp
WiDi 1920×1080@30Hz, 24bpp
1280×720@60Hz, 24bpp
eDP (x4) 3200×2000@60Hz, 24bpp
LVDS 1920×1200@60Hz
Maximum supported Pixel Clock
Port Max Pixel Clock
DP 414.5 MHz
HDMI 300 MHz
DVI 165 MHz
DDI supported resolutions
Display1 Display2 Display3 Max.Res Display 1 Max.Res Display 2 Max.Res Display 3
HDMI/DP HDMI/DP eDP/LVDS 4096×2160@24Hz
3200×2000@60Hz 4096×2160@24Hz
3200×2000@60Hz 3200×2000@60Hz @ eDP
1920×1200 @ LVDS
DVI DVI/WiDi eDP/LVDS 1920×1200@60Hz 1920×1200@60Hz
1920×1080@30Hz
3200×2000@60Hz @ eDP
1920×1200 @ LVDS
DP/HDMI DVI/WiDi eDP/LVDS 3200×2000@24Hz
4096×2160@24Hz 1920×1200@60Hz
1920×1080@30Hz 3200×2000@60Hz @ eDP
1920×1200 @ LVDS
Link Data Rate
The maximum supported Display Ports resolutions are dependent on the Link Data Rate and the used Lane Count:
Link Data Rate 1 Lane 2 Lanes 4 Lanes
RBR 1024Ч600 1400Ч1050 2240Ч1400
HBR 1280Ч960 1920Ч1200 2880Ч1800
HBR2 1920Ч1200 2880Ч1800 3840Ч2160
(valid for 60Hz refresh rate and 24bpp)
3 independent Display Support
The COMe-cHL6 supports up to 3 independent displays in Windows 7/8 and Linux
44