Kontron ETX-CD - Manual (Page 14)

ETX®-CD / Specification
3.4 Electrical Specification
3.4.1 Supply Voltage
Following supply voltage is specified at the ETX® connector:
Supply Voltage: 5V +/- 5%
5V_Stb: 5V DC +/- 5%
3.4.2 Power Supply Rise Time
» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.
» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point
following the ATX specification
3.4.3 Supply Voltage Ripple
» Maximum 100 mV peak to peak 0 – 20 MHz
3.4.4 Power Consumption
The maximum Power Consumption of the different ETX®-CD modules is 19 - 40W (100% CPU load; 90°C CPU temperature).
Further details with measurements and TDP values of the single variants can be found in our
customer section .
Information there is available after registration.
14