Kontron ETX-CD - Manual (Page 66)

ETX®-CD / BIOS Operation
Chipset Control
Feature Option Description
Memory Throttling Enabled
Disabled Controls throttling and bandwidth limiting for the 945
GME
Clock generator Default
Program
“Program” allows to enable/disable manual change of
Spread Spectrum and FSB
PCI Clock Run Enabled
Disabled If Enabled the Clock Run logic will stop the PCI clocks
Serial IRQ Quiet Mode Enabled
Disabled Enabled: Quiet Mode for SIRQ
Disabled: Continuous Mode for SIRQ
Must be enabled for PCI Clock Run enabled
Pop Up Mode Enable Enabled
Disabled
Enables/disables C2 and not C0 change when a PCI
busmaster event appears
Pop Down Mode Enable Enabled
Disabled
Must be switched on when Pop Up Mode is enabled
Port 80 h Cycles LPC Bus
PCI Bus Controls where the port 80 cycles are sent
MC Cycles LPC Bus
PCI Bus Controls where the port 62h/66h cycles to the
microcontroller are sent
66