Kontron KISS Stor 1 - Manual (Page 15)

Product Description
14 KISS-Stor 1 – User’s Manual
Product Description
The KISS-Stor 1 RAID (Redundant Array of Independent/Inexpensive Disks)
subsystem mirrors data to the other disk drive simultaneously, and delivers
optimized performance. If one drive fails, data is secured by the other drive and
alarm sounds to alert you. RAID 1 configuration is ideal for data redundancy.
Featuring intelligent recovery, KISS-Stor 1 let you hot swap a failed drive and it
automatically rebuilds the data to the new drive without any system down time.
KISS-Stor 1 features a user-friendly design that lets you easily that lets you easily
install two drives and replace a drive that fails. Each hard drive carrier supports a
one-inch high 3.5 inch for factor disk drive. Additional data security is provided by
a key-locking system, that prevents unauthorized access to each disk drive during
operation.
Fig. : KISS-Stor 1
The KISS-Stor 1 comes with two drive carriers accessed from the front. The front
of the two drive carriers are equipped with disk activity LED indicators (green,
yellow and red) and a drive carrier lock.
Each side of the RAID subsystem features a rail channel and holes for the
mounting screws. These allow you to secure the RAID 1 subsystem inside of a
computer case.
The jumpers ( no jumper setting is needed ) and connectors are located on the
rear side of the unit.