Pb-tim2 user’s manual chapter 5 pinouts – Kontron PB-TIM2 User Manual
Page 35
PB-TIM2 User’s Manual
Chapter 5 Pinouts
28
10
23
27
26
24
Front
Panel
VMOD-2
Pin Nr.
Front
Panel
VMOD-2D
Pin-Nr.
Piggyback
ST102 Pin
Number
Front
Panel
VMOD-2
Pin Nr.
Front
Panel
VMOD-2D
Pin-Nr.
Piggyback
ST102 Pin
Number
24
25
1 & 2
23
41
25 & 26
22
8
3
21
24
4
20
40
5
19
7
6
18
23
7
17
39
8
16
6
9
15
22
10
14
38
11
13
5
12
Piggyback
B
12
21
13
11
37
14
10
4
15
9
20
16
8
36
17
7
3
18
6
19
19
5
35
20
4
2
21
3
18
22
2
34
23
1
1
24
An optional 50-way header behind the front-panel connector has an identical pin-out to the front-panel connector. It is
provided for applications where the flat-band cable is to be routed internally or where an alternative front panel is to be
fitted and used. In some cases, cables can be routed through the systems interior i.e. To the back panel (from this
optional connector) and some from the external connector on the front-panel. In doing so, take care not to exceed the fan-
out ability of the piggyback’s driver circuits.
Note
With systems that have more than one of this type of connector or which use several VMOD-2 or
IMODs with various piggybacks, it is advisable to put a drop of paint on the back of the mating
connector and on the front panel of the VMOD-2 or IMOD to indicate connections. The connector
splits virtually in half (pins 1 to 24 and 27 to 50) for connection to the piggybacks B and A
respectively. For more information on the VMOD-2/IMOD series of PEP MODPACK carrier boards,
refer to the relevant manual.
July 30, 1997
© 1996 PEP Modular Computers
Page 5-5