Pb-tim2 user’s manual chapter 1 introduction – Kontron PB-TIM2 User Manual
Page 9
Advertising
PB-TIM2 User’s Manual
Chapter 1 Introduction
1.4 Board Overview
FPGA
Optoisolation
Stage
ROM
1.5 Features
• 3 independent timers
• 16 bit resolution
• 8-bit prescaler
• 9 different modes
• 3 inputs per timer, software defined
• 1 output per timer, software defined
• common clear, software defined
• 1 EEPROM (2 kbit) for software driver / parameter backup (for future use)
• inputs with optoisolation, RC filters and configurable thresholds
• input frequency up to 300 kHz
• outputs with optoisolation and open collector source circuitry (high-side switch)
• output frequency up to 10 kHz
• board ID: $E1
• software ID: $01
• full interrupt handling
July 30, 1997
© 1996 PEP Modular Computers
Page 1-3
Advertising