Mercedes-Benz S-Sedan 2015 Owners Manual - Manual (Page 269)

X Press the : or 9 button to set the
position from Level Level +5 +5 (high) to Level Level -5 -5
(low).
X Press the a or % button to save the
setting.
Using the Memory function, you can save and
call up the position of the Head-up display as
a single memory preset (
Y
page 137).
Setting the brightness
The brightness of the head-up display is auto-
matically adjusted to the surrounding ambi-
ent light. You can also individually adjust the
brightness of the head-up display.
X Switch on the Head-up display
(
Y
page 253).
X
Use ò on the steering wheel to call up
the list of menus.
X Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X
Confirm by pressing a on the steering
wheel.
X Use the : or 9 button to select the
Head-up Display Head-up Display submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Brightness Brightness function.
X
Press the a button to save the setting.
X
Press the : or 9 button to set the
brightness from Level +5 Level +5 (bright) to
Level -5 Level -5 (dark).
X
Press the a or % button to save the
setting.
Light submenu
Switching the spotlight function on/off
X
Use ò on the steering wheel to call up
the list of menus.
X Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X
Confirm by pressing a on the steering
wheel.
X Press the : or 9 button to select the
Lights Lights submenu.
X
Press a to confirm.
X Use : or 9 to select the Spotlight Spotlight
function.
X
Press the a button to save the setting.
When the spotlight function is activated,
the assistance graphic shows the pedes-
trian symbol.
Further information on the spotlight function
(
Y
page 240).
Switching the daytime running lamps on/
off
This function is not available in Canada.
X Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Lights Lights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Daytime Running Lights Daytime Running Lights function.
If the Daytime Running Lights Daytime Running Lights function
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in white.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 142).
Instrument cluster submenu
Selecting the unit of measurement for dis-
tance
The
Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
function allows you to choose whether cer-
tain displays appear in kilometers or miles in
the multifunction display.
Menus and submenus
267
On-board
comput
er
and
display
s
Z