Wheels and tires, Changing a wheel – Mercedes-Benz S-Sedan 2015 Owners Manual User Manual
Page 419
X
Using lug wrench =, loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
X
Take the ratchet wrench out of the vehicle
tool kit and place it on the hexagon nut of
the jack so that the letters AUF are visible.
AMG vehicles and vehicles with AMG
equipment: to protect the vehicle body, the
vehicle has covers next to the jacking points
on the outer sills.
X
AMG vehicles and vehicles with AMG
equipment: fold cover ? upwards.
X
Position jack B at jacking point A.
X
Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn ratchet wrench C until jack B sits
completely on jacking point A and the
base of the jack lies evenly on the ground.
X
Turn ratchet wrench C until the tire is
raised a maximum of 1.2 in (3 cm) from the
ground.
Changing a wheel
417
Wheels
and
tires
Z