Mercedes-Benz SLS-Class 2014 Owners Manual - Manual (Page 236)

X Do not remove any foreign objects which
have penetrated the tire, e.g. screws or
nails.
X Take the TIREFIT kit out of the trunk
(
Y
page 232).
X Open the TIREFIT kit and remove "max.
80 km/h" sticker D.
X Affix sticker D within the driver's field of
vision.
i If TIREFIT leaks out, allow it to dry. It can
then be removed like a layer of film.
If you get TIREFIT on your clothing, have it
cleaned as soon as possible with
perchloroethylene.
Comply with the manufacturer's safety
instructions on the tire inflation compressor
label and on the tire sealant bottle.
i You will also find operating instructions
= in the lid of the TIREFIT kit.
X Pull the cable and filler hose E out of the
housing.
X Unscrew flanged cap A.
X Unscrew the cap from tire sealant
bottle :. Make sure that the aluminum
film is not damaged when doing so.
X Screw tire sealant bottle : clockwise
tightly onto flange seal F.
This pierces the aluminum film.
X Remove the cap from the valve on the faulty
tire.
X Make sure that pressure release screw C
is closed.
X
Remove the dust protection cap from filler
hose E.
X
Screw the end of filler hose E onto tire
valve G.
X
Make sure that on/off switch ; on the tire
inflation compressor is set to 0.
X Insert connector ? into the 12 V socket
(
Y
page 203).
X
Select key position 2 with the Start/Stop
button (
Y
page 119).
i The battery discharges during tire
inflation compressor usage. For this
234
Flat tire
Break
dow
n
ass
is
tanc
e