Lights and windshi eld wipers, Exterior lighting – Mercedes-Benz SLS-Class 2014 Owners Manual User Manual

Page 99

Advertising
background image

causes of poor visibility due to the weather

conditions such as spray. There is a risk of an

accident.
In such situations, turn the light switch to

L.

The automatic headlamp feature is only an

aid. The driver is responsible for the vehicle's

lighting at all times.
à is the favored light switch setting. The

light setting is automatically selected

according to the brightness of the ambient

light (exception: poor visibility due to weather

conditions such as fog, snow or spray):

R

SmartKey in position 1 in the ignition lock:

the parking lamps are switched on or off

automatically depending on the brightness

of the ambient light.

R

With the engine running: if you have

activated the daytime running lamps

function via the on-board computer, the

daytime running lamps or the low-beam

headlamps and parking lamps are switched

on or off automatically depending on the

brightness of the ambient light.

Only for Canada:
The daytime running lamps improve the

visibility of your vehicle during the day. The

daytime running lamps function is required by

law in Canada. It cannot therefore be

deactivated.
When the engine is running and the vehicle is

stationary: if you move the selector lever from

a drive position to P, the daytime running

lamps/low-beam headlamps go out after

three minutes.
When the engine is running, the vehicle is

stationary and in bright ambient light: if you

turn the light switch to T, the daytime

running lamps and parking lamps switch on.
If the engine is running and you turn the light

switch to L, the manual settings take

precedence over the daytime running lamps.
USA only:

The daytime running lamps improve the

visibility of your vehicle during the day. To do

this, the daytime running lamps function must

be switched on using the on-board computer

(

Y

page 158).

If the engine is running and you turn the light

switch to T or L, the manual settings

take precedence over the daytime running

lamps.

i

In the USA, the daytime running lamps are

deactivated upon delivery from the factory.

X

To switch on automatic headlamp

mode: turn the light switch to Ã.

Low-beam headlamps
Even if the light sensor does not detect that

it is dark, the parking lamps and low-beam

headlamps switch on when the ignition is

switched on and the light switch is set to the

L position. This is a particularly useful

function in the event of rain and fog.

X

To switch on the low-beam headlamps:

turn the SmartKey in the ignition lock to

position 2 or start the engine.

X

Turn the light switch to L.

The green L indicator lamp in the

instrument cluster lights up.

Parking lamps

!

If the battery has been excessively

discharged, the parking lamps or standing

lamps are automatically switched off to

enable the next engine start. Always park

your vehicle safely and sufficiently lit

according to legal standards. Avoid the

continuous use of the T parking lamps

for several hours. If possible, switch on the

X right or the W left standing lamp.

X

To switch on: turn the light switch to

T.

Standing lamps
Switching on the standing lamps ensures the

corresponding side of the vehicle is

illuminated.

Exterior lighting

97

Lights

and

windshi

eld

wipers

Z

Advertising