Tech nical da ta, Vehicle data, coupe – Mercedes-Benz SLS-Class 2014 Owners Manual User Manual

Page 286

Advertising
background image

Comply with the important safety precautions

for service products when handling coolant

(

Y

page 279).

The coolant is a mixture of water and

antifreeze/corrosion inhibitor. It performs

the following tasks:

R

corrosion protection

R

antifreeze protection

R

raising the boiling point

If the coolant has antifreeze protection down

to -35 ‡ (-37 †), the boiling point of the

coolant during operation is approximately

266 ‡ (130 †).
The antifreeze/corrosion inhibitor

concentration in the engine cooling system

should:

R

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †).

R

not exceed 55% (antifreeze protection

down to -49 ‡ [-45 †]). Otherwise, heat

will not be dissipated as effectively.

If the vehicle has lost coolant, add equal

amounts of water and antifreeze/corrosion

inhibitor. Mercedes-Benz recommends an

antifreeze/corrosion inhibitor concentrate in

accordance with MB Specifications for

Service Products 310.1.
The coolant is checked with every

maintenance interval at a qualified specialist

workshop.

i

When the vehicle is first delivered, it is

filled with a coolant mixture that ensures

adequate antifreeze and corrosion

protection.

Windshield/headlamp cleaning

system

Important safety notes
!

Only use washer fluid that is suitable for

plastic lamp lenses, e.g. MB SummerFit or

MB WinterFit. Unsuitable washer fluid

could damage the plastic lenses of the

headlamps.

!

Do not add distilled or de-ionized water to

the washer fluid container. Otherwise, the

level sensor may be damaged.

!

Only MB SummerFit and MB WinterFit

washer fluid should be mixed together. The

spray nozzles may otherwise become

blocked.

At temperatures above freezing:

X

Fill the washer fluid reservoir with a mixture

of water and windshield washer fluid, e.g.

MB SummerFit.

Add 1 part MB SummerFit to 100 parts water.
At temperatures below freezing:

X

Fill the washer fluid reservoir with a mixture

of water and windshield washer fluid, e.g.

MB WinterFit.

Adapt the mixing ratio to the outside

temperature.

R

Down to 14 ‡ (Ò10 †): mix 1 part MB

WinterFit to 2 parts water.

R

Down to Т4 ‡ (Т20 †): mix 1 part MB

WinterFit to 1 part water.

R

Down to Т20.2 ‡ (Т29 †): mix 2 parts MB

WinterFit to 1 part water.

i

Add windshield washer fluid, e.g. MB

SummerFit or MB WinterFit, to the washer

fluid all year round.

Filling capacities

Model

Capacity

All models

7.4 US qt (7.0 l)

Vehicle data, Coupe

Dimensions and weights

The data stated here specifically refers to a

vehicle with standard equipment. Consult an

284

Vehicle data, Coupe

Tech

nical

da

ta

Advertising