Adjusting the 4-way lumbar support, Seats, steering wheel and mirrors, Seats – Mercedes-Benz E-Wagon 2013 Owners Manual User Manual

Page 110

Advertising
background image

Adjusting the 4-way lumbar support

:

To raise the backrest contour

;

To soften the backrest contour

=

To lower the backrest contour

?

To harden the backrest contour

You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.

Folding bench seat in the cargo

compartment (Wagon)

Important safety notes

G

WARNING

The rear seat backrests must be locked in the
upright position if you are using the folding
bench seat in the cargo compartment.
Do not pull away unless the head restraint in
the folding bench seat is installed correctly.
Make sure that the center of the head
restraint supports the seat occupant's head
at about eye level. This can reduce the risk of
injury to a child in the event of an accident.
Ensure that the seat belt is routed correctly
across the body and the seat belt buckle is
engaged.
Never leave children unsupervised in the
vehicle. This applies even if they are secured
in a child restraint system.
Secure children as recommended; see the
"Children in the vehicle" section.

G

WARNING

Only replace damaged covers with genuine
covers.
Make sure that items of luggage and other
objects in the cargo compartment are well
secured.
Otherwise, the load could cause injury in the
event of sharp braking, a sudden change in
direction or an accident.

The folding bench seat in the cargo
compartment is only suitable for persons no
more than 4.6 ft (1.40 m) tall and weighing a
maximum of 110 lb (50 kg).
The maximum permissible weight available
for passengers may be reduced by extensive
optional extras and the vehicle load. Observe
the maximum gross vehicle weight and the
gross axle weight rating, which can be found
on the vehicle identification plate
(

Y

page 405).

The combined cargo cover and net must be
installed if you are using the folding bench
seat (

Y

page 297).

Folding out the folding bench seat

X

Make sure that the backrests of the rear
bench seat are locked in the upright
position.

X

Move the handle for the combined cargo
cover and net upwards (

Y

page 297).

X

Pull release handle : and fold the
backrest of the folding bench seat
upwards.

108

Seats

Seats, steering wheel and mirrors

Advertising
This manual is related to the following products: