Mercedes-Benz E-Wagon 2013 Owners Manual - Manual (Page 239)

Activating/deactivating PRE-SAFE ®
Brake
PRE-SAFE ® Brake is only available in vehicles
with DISTRONIC PLUS.
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press the 9 or : button to select
PRE-SAFE Brake .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
When PRE-SAFE ® Brake is activated, the
multifunction display shows the Ä symbol
as long as the HOLD function is not activated
(
Y page 196).
Vehicles with Parking Guidance: if
PARKTRONIC is activated and you are driving
at a speed under 22 mph (35km/h) the j
symbol for Parking Guidance is displayed
instead of the Ä symbol (
Y page 205)
If the PRE-SAFE Brake: Sensors
Deactivated message appears, the radar
sensor system is deactivated.
X Switch on the radar sensor system
(
Y page 241).
For more information on PRE-SAFE ® Brake,
see ( Y page 72).
Activating/deactivating ATTENTION
ASSIST
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press 9 or : to select Attention
Assist .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
When ATTENTION ASSIST is activated, the
À symbol appears in the multifunction
display when the ignition is on.
For further information about ATTENTION
ASSIST, see (
Y page 210).
Activating/deactivating Blind Spot
Assist
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press the 9 or : button to select
Blind Spot Asst. .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
If the Blind Spot Assist Sensors
Deactivated or Act. Blind Spot Asst.
Sensors Deactivated message appears,
the radar sensor system is deactivated.
X Switch on the radar sensor system
(
Y page 241).
For further information about Blind Spot
Assist, see (
Y page 214).
For further information about Active Blind
Spot Assist, see (
Y page 218).
Activating/deactivating Lane Keeping
Assist
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press the 9 or : button to select
Lane Keep. Asst.
X Press the a button.
The current selection is displayed.
X Press a to confirm.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the à symbol
appears in the multifunction display when the
ignition is on.
For further information about Active Lane
Keeping Assist, see (
Y page 221).
Menus and submenus
237
On-board computer and displays
Z