Mbrace, Stowage and features, Features – Mercedes-Benz E-Wagon 2013 Owners Manual User Manual

Page 313

Advertising
background image

pull at a cable to disconnect a plug from a
115 V AC power socket. Never use a damaged
connection cable. The 115 V AC power socket
must never be connected to another 115 V
AC power source. Do not use a converter with
an earthed plug for the 115 V AC power
socket. This could cause serious injury to you
and/or other people.

G

WARNING

If the 115 V AC power socket is damaged or
pulled out of the trim, do not use or touch the
115 V AC power socket. The use of a 115 V
AC power socket that has been damaged or
pulled out of the trim could cause serious
injury to you or others.

X

Open flap =.

X

Switch on the ignition.

X

Insert the plug of the electronic device into
115 V power socket :.
Indicator lamp ; lights up.
If indicator lamp ; does not light up, read
more in the section on malfunctions.

X

To turn off: disconnect the plug from

115 V power socket :.
Ensure that you do not pull on the cord.

115 V power socket : provides an
alternating voltage of 115 V so that small
electronic devices can be connected. These
devices, such as games consoles, chargers
and laptops, should not consume more than
a maximum of 150 W altogether.

Requirements for operation of these devices:

R

the plug of the electronic device is plugged
into 115 V power socket :.

R

the maximum wattage of the device to be
connected must not exceed 150 W.

R

the on-board power supply is within a
permissible voltage range.

R

the 12 V sockets in the rear and the cargo
compartment/trunk are operational
(

Y

page 309).

Possible causes of malfunctions:

R

the on-board power supply is not within a
permissible voltage range.

R

the temperature of the DC/AC converter is
temporarily too high.

R

some small electronic devices have a
constant nominal power of less than
150 W, but a very high switch-on current.
These devices will not work. If you connect
such a device, 115 V power socket : will
not supply it with power.

If indicator lamp ; still does not light up,
contact a qualified specialist workshop.

mbrace

Important safety notes
!

A license agreement must exist in order

to activate the mbrace service. Ensure that
your system is activated and ready for use,
and press the ï MB Info call button to
register. If any of the steps mentioned is
not carried out, the system may not be
activated.
If you have questions about the activation,
contact one of the following telephone
assistance services:

R

USA: Mercedes-Benz Customer

Assistance Center under
1-800-FOR-MERCedes
(1-800-367-6372) or 1-888-990-9007

R

Canada: Customer Service at

1-888-923-8367

Features

311

Stowage and features

Z

Advertising
This manual is related to the following products: