Memory function, Storing settings, Calling up a stored setting – Mercedes-Benz E-Cab 2012 Owners Manual User Manual

Page 115: Settings, Seats, steering wheel and mirrors

Advertising
background image

exterior mirror to a position which
allows you to see the rear wheel and
the curb.

X

Press memory button

M ? and one of

the arrows on adjustment button =
within three seconds.
The parking position is stored if the
exterior mirror does not move.

If the mirror moves out of position, repeat
the steps.

Calling up a stored parking position

setting

X

Turn the SmartKey to position

2 in the

ignition lock.

X

Adjust the exterior mirror on the front-
passenger side with the corresponding
button (

Y

page 110).

X

Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.

The exterior mirror on the front-passenger
side moves back to its original position:

R

as soon as you exceed a speed of 6 mph
(10 km/h)

R

about ten seconds after you have
disengaged reverse gear

R

if you press button : for the exterior
mirror on the driver's side

Memory function

Storing settings

With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:

R

position of the seat, backrest and head
restraint

R

driver's side: steering wheel position

R

driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides

G

WARNING

Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.

X

Adjust the seat (

Y

page 104).

X

On the driver's side, adjust the steering
wheel (

Y

page 109) and the exterior mirrors

(

Y

page 110).

X

Press memory button

M and one of the

storage position buttons

1, 2 or 3 within

three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.

Calling up a stored setting

X

Press and hold the relevant storage
position button

1, 2 or 3 until the seat,

steering wheel and exterior mirrors are in
the stored position.

i

The setting procedure is interrupted as

soon as you release the storage position
button.

Memory function

113

Seats, steering wheel and mirrors

Z

Advertising
This manual is related to the following products: