Combination switch, Hazard warning lamps, Lights and windshield wipers – Mercedes-Benz E-Cab 2012 Owners Manual User Manual
Page 121: Exterior lighting
restart it, the previous rear fog lamp
settings are restored.
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is
operated ten times while the lights are on and
the engine is running (
Combination switch
Turn signals
:
High-beam headlamps
;
Right turn signal
=
High-beam flasher
?
Left turn signal
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position
2 or start the engine.
X
Turn the light switch to L or c or
Ã.
X
Press the combination switch beyond the
pressure point in the direction of
arrow :.
In the c or à position, the high-
beam headlamps are only switched on
when it is dark and the engine is running.
The K indicator lamp in the instrument
cluster lights up when the high-beam
headlamps are switched on.
X
To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The K indicator lamp in the instrument
cluster goes out.
High-beam flasher
X
To switch on: turn the SmartKey in the
ignition lock to position
1 or 2 or start the
engine.
X
Pull the combination switch in the direction
of arrow =.
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
R
an air bag is deployed.
R
the vehicle is slowed down severely from a
speed of over 45 mph(70 km/h) and comes
to a halt.
Exterior lighting
119
Lights and windshield wipers
Z