Load index, Dot, tire identification number (tin), Index, see load index – Mercedes-Benz E-Cab 2012 Owners Manual User Manual

Page 330: Wheels and tires, Tire labeling

Advertising
background image

i

Not all tires that have the M+S

identification offer the driving
characteristics of winter tires. Winter tires
have, in addition to the M+S identification,
the i snow flake symbol on the tire
sidewall. Tires with this identification fulfill
the requirements of the Rubber
Manufacturers Association (RMA) and the
Rubber Association of Canada (RAC)
regarding the tire traction on snow and
have been especially developed for driving
on snow.

An electronic speed limiter prevents your
vehicle from exceeding a speed of
130 mph (210 km/h).
The speed rating of tires mounted at the
factory may be higher than the maximum
speed that the electronic speed limiter
permits.
Make sure that your tires have the required
speed rating as specified in the "Tires"
section (

Y

page 333), e.g. if you buy new

tires.
Further information about reading tire data
can be obtained from any qualified specialist
workshop, e.g. an authorized Mercedes-Benz
Center.

Load index

i

Tire data is vehicle-specific and may

deviate from the data in the example.

In addition to the load bearing index, load
index : may be imprinted after the letters

that identify speed index B (

Y

page 326) on

the sidewall of the tire.

R

If no specification is given: no text (as in the
example above), represents a standard
load (SL) tire

R

XL or Extra Load: represents a reinforced
tire

R

Light load: represents a light load tire

R

C, D, E: represents a load range that
depends on the maximum load that the tire
can carry at a certain pressure

DOT, Tire Identification Number (TIN)

U.S. tire regulations prescribe that every
manufacturer of new tires or retreader has to
imprint a TIN in or on the sidewall of each tire
produced.

The TIN is a unique identification number. The
TIN enables the tire manufacturers to inform
purchasers of recalls and other safety-
relevant matters. It makes it possible for the
purchaser to easily identify the affected tires.
The TIN is made up of manufacturer
identification code ;, tire size =, tire type
code ? and manufacturing date A.

i

Tire data is vehicle-specific and may

deviate from the data in the example.

DOT (Department of Transportation): tire

symbol : indicates that the tire complies
with the requirements of the U.S. Department
of Transportation.

328

Tire labeling

Wheels and tires

Advertising
This manual is related to the following products: