Driving off, Controls in detail, Driving and parking – Mercedes-Benz M-Class 2010 Owners Manual User Manual

Page 107

Advertising
background image

X

Make sure the KEYLESS-GO start/stop
button is inserted in the starter switch
(

Y

page 80).

i

To start the engine with the SmartKey

instead of the KEYLESS-GO function,
remove the KEYLESS-GO start/stop button
from the starter switch. Proceed as
described in “With SmartKey”
(

Y

page 104).

X

Depress the brake pedal during the starting
procedure.

X

Do not depress the accelerator pedal.

X

Gasoline engine: Press the KEYLESS-GO

start/stop button once.
The engine starts automatically.

X

Diesel engine: Press the KEYLESS-GO

start/stop button once.
The engine preglows and starts
automatically.

i

If the engine is at operating temperature,

the time the engine needs to preglow is
reduced.

Starting difficulties

!

Remember that extended starting

attempts can drain the battery.

The engine does not start. You can hear

the starter.
There could be a malfunction in the engine
electronics or in the fuel supply system.
Carry out the following steps:

X

If you are starting the engine with the
SmartKey: Turn the SmartKey in the starter
switch to position

0 and repeat the starting

procedure.

X

If you are starting the engine with KEYLESS-
GO: Close any doors that may be open to
allow for better detection of the SmartKey.

or

X

Remove the KEYLESS-GO start/stop
button from the starter switch.

X

Start the engine with the SmartKey as radio
signals from another source may be
interfering with the KEYLESS-GO function.

X

Repeat the starting procedure.

If the engine does not start after several
starting attempts:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

The engine does not start. You cannot

hear the starter.
The battery may not be charged sufficiently.

X

Get a jump start (

Y

page 336).

If the engine will not start despite a jump
start:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

The starter has been exposed to excessive
temperatures.

X

Let the starter cool for about 2 minutes.

X

Repeat the starting procedure.

If the engine does not start after several
starting attempts:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

Driving off

G

Warning!

On slippery road surfaces, never downshift in
order to obtain braking action. This could
result in drive wheel slip and reduced vehicle
control. Your vehicle’s ABS will not prevent
this type of loss of control.

!

Do not run a cold engine at high engine

speeds. Running a cold engine at high
engine speeds may shorten the service life
of the engine. This is not covered by the
Mercedes-Benz Limited Warranty.
ML 63 AMG: At engine temperatures below
68‡ (20†), the engine’s maximum speed

Driving and parking

105

Controls in detail

164_AKB; 7; 31, en-US
d2ureepe,

Version: 2.11.8.1

2009-09-11T12:07:36+02:00 - Seite 105

Z

Advertising