Settings menu, Menu, Controls in detail – Mercedes-Benz M-Class 2010 Owners Manual User Manual

Page 131: Control system

Advertising
background image

Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunction
display when the SmartKey in the starter
switch is turned to position

0 or removed

from the starter switch. With KEYLESS-GO,
the number of messages will reappear when
you turn off the engine by pressing the
KEYLESS-GO start/stop button and open the
driver’s door.
Except for high-priority messages, the vehicle
status message memory will be cleared when
you switch off the ignition.

Settings menu

Introduction

In the

Settings menu there are two

functions: The function

To reset, press

reset button for 3 seconds, with which
you can reset all the settings to the original
factory settings and a collection of submenus
with which you can make individual settings
for your vehicle.
The following settings and submenus are
available in the

Settings menu:

R

Resetting to factory settings
(

Y

page 129)

R

Submenus in the Settings menu
(

Y

page 130)

R

Instrument cluster submenu
(

Y

page 130)

R

Time/Date submenu (

Y

page 132)

R

Lighting submenu (

Y

page 133)

R

Vehicle submenu (

Y

page 135)

R

Comfort submenu (

Y

page 135)

Resetting to factory settings

You can reset the settings of all submenus to
the factory settings.
For safety reasons, the function

Lamp

Circuit Headlamp in the Lighting
submenu cannot be reset while driving.

The following message appears in the
multifunction display:

Settings

Cannot be

completely reset

to factory settings

when engine is running.

X

Press button V or U repeatedly until
the

Settings menu appears in the

multifunction display.

X

Press the reset button in the instrument
cluster (

Y

page 117) for approximately

3 seconds.
The request to press the reset button once
more to confirm appears in the
multifunction display.

X

Press the reset button once more.

The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
approximately 5 seconds, the

Settings

menu reappears in the multifunction display.

Control system

129

Controls in detail

164_AKB; 7; 31, en-US
d2ureepe,

Version: 2.11.8.1

2009-09-11T12:07:36+02:00 - Seite 129

Z

Advertising