Mercedes-Benz CLS-Class 2008 Owners Manual - Manual (Page 148)

147
Controls in detail
Control system
Displaying intermediate time
̈ Press button ç while the timer is
running.
The intermediate time is shown for
5 seconds.
Stopping the RACETIMER
̈ Press button æ.
The timer stops.
Saving lap time and starting a new lap
̈ Press button ç while the timer is
running.
The intermediate time will be shown for
5 seconds.
̈ Press button ç within the next
5 seconds.
The intermediate time shown will be
saved as a lap time.
The RACETIMER begins timing the new
lap. The new lap begins to be timed as
soon as the intermediate time is called
up.
1 Gear indicator
2 RACETIMER
3 Best lap time
4 Lap number
Resetting current lap
̈ Press button æ while the timer is
running.
The timer stops.
̈ Press button ç.
The lap time is reset to “0”.
Deleting all laps
̈ Press button æ while the timer is
running.
The timer stops.
̈ Press the reset button twice
(
୴ page 26).
̈ Press button æ.
The timer starts. The saved laps are de-
leted.
i
When you stop the vehicle and turn the
Smartkey to position 1 ( ୴ page 38) or, in vehi-
cles with KEYLESS-GO*, turn off the engine and
do not open the driver’s door, the RACETIMER
stops timing. Timing is resumed when you
switch the ignition back on (
୴ page 38) or
restart the engine ( ୴ page 51) and then press
button æ.
i You can save up to nine laps.
i It is not possible to delete a single saved lap.
i When you switch off the engine, the
RACETIMER will be reset to “0” after
30 seconds. All laps are deleted.