Mercedes-Benz CLS-Class 2008 Owners Manual - Manual (Page 408)

407
Practical hints
Replacing bulbs
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:
ț Additional turn signals in the exterior
rear view mirrors
ț High mounted brake lamp
ț Bi-Xenon* lamps
ț Front fog lamps
ț Front side marker lamps
ț Parking and standing lamps (vehicles
with Bi-Xenon* headlamps only)
ț Rear lamps (except license plate
lamps)
Replacing bulbs for front lamps
1 Housing cover for low beam halogen or
Bi-Xenon* headlamp
2 Housing cover for high beam head-
lamp/high beam flasher bulb and for
parking and standing lamp bulb
3 Bulb socket for turn signal lamp bulb
4 Bulb holder of high beam bulb
5 Bulb socket for parking and standing
lamp bulb
6 Bulb holder of low beam bulb
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to
position
M ( ୴ page 126).
̈ Open the hood ( ୴ page 286) (except
for side marker lamps).
! Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by an autho-
rized Mercedes-Benz Center.
Warning!
G
Do not remove the cover 1 for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon* lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.