Mercedes-Benz CLS-Class 2008 Owners Manual - Manual (Page 168)

167
Controls in detail
Control system
Which messages will appear in the multi-
function display depends on whether your
telephone is switched on or off:
ț If the telephone is off, the message in
the multifunction display is:
TEL off .
ț If the telephone is on:
The telephone will then search for a
network. During this time the multi-
function display is empty.
As soon as the telephone has found a
network,
READY appears in the multi-
function display.
This standby message indicates that your
telephone is ready for use and you can
operate it using the control system.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the multifunction display you will then see
the message or if supported, the caller ID
(name and number):
̈ Press button s.
You have answered the call. In the mul-
tifunction display you see the length of
the call.
Ending and rejecting a call
̈ Press button t.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Press button ÿ or è repeatedly
until the Tel menu appears in the
multifunction display.
̈ Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. In the
multifunction display you will see the
message
Please Wait .
When the message Please Wait dis-
appears, the phone book has been
loaded.
̈ Press button j or k repeatedly
until the desired name appears in the
multifunction display.
The stored names are displayed in as-
cending or descending alphabetical
order.
୴୴