Oldcastle BuildingEnvelope Solar Shelf - Manual (Page 21)

21 


S U N C O N T R O L - I N S T A L L A T I O N M A N U A L
SOLAR SHELF ™
SS-124
(Square)
SS-125
(Bullnose)
SS-123
(Radius)
Attach end cap with
(4) FS-25 (#8 x 1/2" pfh tek)
fasteners.
Always locate strut at end
when end cap is required
Optional Interior Covers
FIGURE 24
4.10) If necessary, attach end caps to shelf strut using (4) four FS-25 (#8 x 1/2" pfh tek) fasteners, at
ends requiring end caps; panel strut must be mounted flush with ends of panels. See FIGURE 24.