Clarion DXZ378RMP - Manual (Page 14)

English
14
DXZ378RMP/DXZ379RMP
Radio Operations
Listening to the radio
1. Press the [ SRC ] button and select the radio
mode. The frequency or PS and PTY
appears in the display.
∗ PS: Programme service name
∗
PTY: Programme type
2. Press the [ BND ] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜
FM1...
3. Press the [ x ] or [ v ] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
1. Press the [ BND ] button and select the
desired band (FM or AM (MW/LW)).
2. Tune into a station.
∗
If “ MANU ” is lit in the display, press and hold
the [ BND ] button for 1 second or longer.
“ MANU ” in the display goes off and seek
tuning is now available.
∗ If “ TA ” is lit in the display, TP stations are
automatically sought.
● DX SEEK
Press the [ x ] or [ v ] button to automatically
seek a station.
When the [ v ] button is pressed, the station is
sought in the direction of higher frequencies; if
the [
x ] button is pressed, the station is sought
in the direction of lower frequencies.
∗ When seek tuning starts, “ DX SEEK ” appears in
the display.
● LOCAL SEEK
If the [ x ] or [ v ] button is pressed and held
in position for 1 second or longer, local seek
tuning will be enabled. Broadcast stations with
good reception sensitivity are selected.
∗ When local seeking starts, “ LO SEEK ” appears in
the display.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [ BND ] button and select the
desired band (FM or AM (MW/LW)).
∗ If “ MANU ” is not lit in the display, press and
hold the [ BND ] button for 1 second or longer.
“ MANU ” is lit in the display and manual tuning
is now available.
2. Tune into a station.
● Quick tuning
Press and hold the [x] or [v] button for 1
second or longer to tune in a station.
●
Step tuning
Press the [x] or [v] button to manually tune
in a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
DXZ378RMP_EN.book 14 ページ ２００６年１１月２７日 月曜日 午後２時２２分