Clarion DXZ378RMP - Manual (Page 15)

Radio Operations
English
15
DXZ378RMP/DXZ379RMP
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[
DIRECT ] button or the [ w ] / [ z ] button recalls
the stored radio frequency automatically.
1. Press the [ BND ] button and select the
desired band (FM or AM (MW/LW)).
2. Press the corresponding [ DIRECT ] button or
the [ w ] / [ z ] button to recall the stored
station.
Note:
• Press and hold one of the [ DIRECT ] buttons for 2
seconds or longer to store that station into preset
memory.
Manual memory
1. Select the desired station with seek tuning or
manual tuning.
2. Press and hold one of the [ DIRECT ] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Press the [ BND ] button and select the
desired band (FM or AM (MW/LW)).
2. Press and hold the [ ] button for 2 seconds
or longer. The stations with good reception
are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [ ] button.
2. When a desired station is tuned in, press the
[ ] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [ ] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
DXZ378RMP_EN.book 15 ページ ２００６年１１月２７日 月曜日 午後２時２２分