ProgressiveRC 8 PowerLab - Manual (Page 13)

For non-balanced charging, connect the pack to PowerLab 8 like this:
If stock REVOLECTRIX adapters don’t work for your packs, you can make your own
adapters using the CPBP9P-10 Cellpro battery pigtail 10", 9 position, which consists of a
9-pin connector with un-terminated wires. See
Balance connector wiring and the “CellPro
Battery Wiring Diagram” available from the REVOLECTRIX Web site.
See also
Balance connector wiring
XH/EH wiring mode
13