ProgressiveRC 8S CellLog User Manual
Page 16
Advertising
-16-
Cell Voltage Monitor & Logger CellLog 8S
USB port installation
Install USB driver
This release of the USB driver is contained on the CellLog 8S software CD-ROM.
To install the USB driver, run the program X:\USB driver\JunsiUSBInstaller.exe (where X is the drive letter
designator for your CD-ROM drive.)
Charger firmware upgrade steps
Install the CellLog 8S USB driver
Run the program X:\Upgrader\Upgrader.exe (you can download the Upgrader.exe software from the
following website:
).
Connect the CellLog 8S to the PC using the supplied USB cable, choose ―Device‖ in ―Device List‖, then
select the upgrade file (you can download the latest file). The progress bar will appear after you click
―Update…‖
Advertising