ProgressiveRC 8S CellLog - Manual (Page 9)

-9-
Cell Voltage Monitor & Logger CellLog 8S

Alarm Remind
If CellLog detect the alarm events (See Alarm Trigger Settings in P11), it will remind as below:
1. The buzzer beeps every 4 seconds（【Alarm Tone】is selected , See P13）.
2. The corresponding individual voltage and alarm remind show alternatively.
Alarm Remind Information: ―LOW‖, ―OVER‖, ―DIFF‖, ―T_OVER‖
3. ALM port will output the presetting signal.
ALM port signal information:
ALM output port signal is open collector signal, as showed below.
Please pay attention to the port voltage and current limit when you use（<50V,<500mA）
The following are ALM Output typical application.
ALM Output
+
-
Q9
ALM
+
-
VCC
Output
Level Output
R
ALM
+
-
VCC
Output
Relay Output